Raspberry Pi, Error Compile Asterisk


Makefile:50: recipe for target 'gsm/lib/libgsm.a' failed
make[1]: *** [gsm/lib/libgsm.a] Error 2

Buka file makeopts setelah melakukan ./configure pada source code asterisk

Replace armv6l dengan armv6 (ada 3 bagian)

CWP Firewall Error

Firewall pada CWPterdisable dan menggalami kegagalan untuk running pada saat Firewal di triger untuk bekerja

FIle log dari csf dan lfd mengalamai

#csf -u
Can't locate object method "ssl_opts" via package "LWP::UserAgent" at /usr/local/csf/lib/ConfigServer/URLGet.pm line 142.

Solusi

# sed -i "s/\$ua->ssl_opts/#\$ua->ssl_opts/" /usr/local/csf/lib/ConfigServer/URLGet.pm
# csf -u

Access to Centos Web Panel not working with SSL / https

vi /usr/local/cwpsrv/conf.d/cwp-ssl.conf

Listen 2031
<VirtualHost 123.456.789.012:2031>
        ServerName 123.456.789.012
        SSLEngine on
        SSLCertificateKeyFile /etc/pki/tls/cwp-123.456.789.012.key
        SSLCertificateFile /etc/pki/tls/cwp-123.456.789.012.cert
        SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
</VirtualHost>

change to:

Listen 2031
<VirtualHost *:2031>
        ServerName *
        SSLEngine on
        SSLCertificateKeyFile /etc/pki/tls/cwp-123.456.789.012.key
        SSLCertificateFile /etc/pki/tls/cwp-123.456.789.012.cert
        SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
</VirtualHost>

service cwpsrv restart

Now it works fine with https.

REVERSE PROXY APACHE HTTP DAN HTTPS

========================================

MODE 1

======================================== 

<VirtualHost *:*>
    ProxyPreserveHost On

    # Servers to proxy the connection, or;
    # List of application servers:
    # Usage:
    # ProxyPass / http://[IP Addr.]:[port]/
    # ProxyPassReverse / http://[IP Addr.]:[port]/
    # Example: 
    ProxyPass / http://0.0.0.0:8080/
    ProxyPassReverse / http://0.0.0.0:8080/

    ServerName localhost
</VirtualHost> 

=====================================

MODE 2 

=====================================

<Proxy balancer://mycluster>
    # Define back-end servers:

    # Server 1
    BalancerMember http://0.0.0.0:8080/

    # Server 2
    BalancerMember http://0.0.0.0:8081/
</Proxy>

<VirtualHost *:*>
    # Apply VH settings as desired
    # However, configure ProxyPass argument to
    # use "mycluster" to balance the load

    ProxyPass / balancer://mycluster
</VirtualHost>

=========================================

MODE 3 - SSL ON

========================================

Listen 443

NameVirtualHost *:443
<VirtualHost *:443>

    SSLEngine On

    # Set the path to SSL certificate
    # Usage: SSLCertificateFile /path/to/cert.pem
    SSLCertificateFile /etc/apache2/ssl/file.pem


    # Servers to proxy the connection, or;
    # List of application servers:
    # Usage:
    # ProxyPass / http://[IP Addr.]:[port]/
    # ProxyPassReverse / http://[IP Addr.]:[port]/
    # Example: 
    ProxyPass / http://0.0.0.0:8080/
    ProxyPassReverse / http://0.0.0.0:8080/

    # Or, balance the load:
    # ProxyPass / balancer://balancer_cluster_name

</VirtualHost>
 

PAT Pada Mikrotik

ip firewall nat add chain=dstnat src-address=0.0.0.0/0 dst-address=103.241.5.99 protocol=udp port=22221 action=dst-nat to-addresses=172.16.222.2 to-ports=22

Port Address Translation (PAT) Pada Centos

iptables -t nat -A PREROUTING -p tcp --dport 2222 -j DNAT --to-destination 172.16.121.2:22

Mengganti Nama Interface Centos

/sbin/ip link set eth0 down
/sbin/ip link set eth0 name publik
/sbin/ip link set publik up

Edit the file /etc/udev/rules.d/70-persistent-net.rules to change the interface name of a network device. 

# PCI device 0x11ab:0x4363 (sky2)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:00:00:00:00:00",ATTR{dev_id}=="0x0", ATTR{type}=="1",
KERNEL=="eth*", NAME="eth0"